
HI-702 Copper High Range Handheld Colorimeter - Checker HC
In Stock 27 Items available
HI-702
Ideal for freshwater & saltwater aquariums. The HI-702 Copper high range Checker is a simple, accurate and cost effective way to measure high ranges of copper in water. Checker®HC is supplied with reagents for 6 tests.
Ideal for fresh water aquariums
The HI-702 Copper high range Checker is a simple, accurate and cost effective way to measure high ranges of copper in water.
Designed as a more accurate alternative to chemical test kits, the HI-702 provides quick, accurate results in four easy steps.
HI-702 uses an adaptation of the EPA method. The reaction between copper and the bicinchoninate reagent causes a purple tint in the sample.
Ideal for
- Water quality
- Education
- Plating
- Wastewater
- Environmental
- Freshwater Aquariums
Key features
- Small palm-sized design
- Accurate from ±0.05ppm ±5% of reading
- Dedicated to a single parameter
- Auto power off after 10 minutes of inactivity
- Built-in timer for timed reaction readings
Order Information
The HI-702 Copper high range Checker is supplied with sample cuvettes and caps (2), Copper HR reagent starter kit x 6 tests (re-ordering information: Hi-702-25 x 25 tests), battery, instructions and quick start guide.
Also available: HI-702-11 Calibration set.
Four steps. One click. Instant Readout.
1. ‘Zero’ the Checker®HC with your vial & water sample inside
2. Take the vial out and add your reagent
3. Place your vial into your Checker®HC
4. Press the button and read the results
Use HI-702-11 Calibration Set with HI-702 Copper High Range Handheld Colorimeter - Checker®HC.
Use HI-702-25 Reagents with HI-702 Copper High Range Handheld Colorimeter - Checker®HC, 25 Tests
Safety Data Sheets
When using any form of chemical, such as Hanna reagents, it is important you download the relevant safety data sheet and make yourself aware of any precautions you should take when handling the chemical. You can access our library of safety data sheets and download a copy by following the link below.
Please note that the '-' in HI- products should be removed from all searches to find the correct information.
Read More
Range | 0.00 to 5.00 ppm | |
Resolution | 0.01 ppm | |
Accuracy @ 25°C | ± 0.05 ppm ± 5% of reading | |
Light Source | LED @ 575 nm | |
Light Detector | Silicon photocell | |
Environment | 0 to 50°C (32 to 122°F); RH max 95% non-condensing | |
Battery Type | (1) 1.5V AAA | |
Auto-off | After 10 minutes of non-use | |
Dimensions | 86 x 61 x 37.5 mm (3.2 x 2.4 x 1.5") | |
Weight | 64 g | |
Method | adaptation of the EPA method. The reaction between copper and the bicinchoninate reagent causes a purple tint in the sample |