HI-98319 Marine Waterproof Salinity Tester
In Stock 60 Items available
HI-98319
The HI-98319 Salinity Tester accurately measures the level of salt in reef and marine aquariums. This pocket-sized checker enables you to monitor salt levels within saltwater tanks, providing key information to take action and keep your water balanced. This salt tester also measures temperature, and includes solutions in the box for immediate digital salinity measurement with higher accuracy than refractometers.
Our electronic salinity tester measures both high and low ranges of salinity in reef tanks and marine aquariums in parts per thousand (ppt), Practical Salinity Units (PSU), or Specific Gravity (SG).
Ideal for testing salinity in salt water aquariums, it is quick and easy to use and provides digital readout of both salinity and temperature.
Salinity results are displayed in either parts per thousand (ppt), Practical Salinity Units (PSU), or Specific Gravity (SG).
Our marine salinity tester is supplied complete with batteries and solutions allowing you to start measuring right away. Also displays temperature.
This pocket sized meter is waterproof and perfect for the measurement of salinity aquariums using conductivity to determine the salinity level of your water.
Salinity should be checked regularly in aquariums. As Oceans are very stable environments, where there is not a lot of day to day change in the water parameters, fish can respond negatively to even small changes in salinity.
Each meter is supplied with:
- CR2032 battery (installed)
- Storage/protection shield
- Instruction manual
- Quality certificate
- 35.00 ppt calibration standard sachet (x 4)
Care and Maintenance
To obtain the highest accuracy for measurements, it is important to follow these guidelines:
- Calibration is only as good as the solution being used. Fresh solution should be used for each calibration
- The probe should be rinsed with purified water each time before placing in calibration solution or sample to be tested
- Recommended solution: HI-70024P Calibration Solution 35.00ppt, 25 x 20ml sachets
Battery Replacement
The meter features a low battery indicator. When the battery is running low, the battery indicator will blink on the LCD. Simply change the CR2032 Li-ion battery by removing the battery cover located on the back of the meter.
Read More
| Low Range: | ||
| ppt (g/L) | Range: 0.00 to 10.00 ppt (g/L) | |
| PSU | Range: 0.00 to 10.00 PSU | |
| S.G. | Range: 1.000-1.007 | |
| Resolution | ||
| ppt (g/L) | 0.01 | |
| PSU | 0.01 | |
| SG | 0.001 | |
| Accuracy | ||
| ppt (g/L) | ±0.20 | |
| PSU | ±0.20 | |
| SG | ±0.001 |
| High Range: | ||
| ppt (g/L) | Range: 0.0 to 70.0 ppt (g/L) | |
| PSU | Range: 0.0 to 70.0 PSU | |
| S.G. | Range: 0.001-1.041 | |
| Resolution | ||
| ppt (g/L) | 0.1 | |
| PSU | 0.1 | |
| SG | 0.001 | |
| Accuracy | ||
| ppt (g/L) | ±1.0 (0.0 to 40.0) ±2.0 (40.0 to 70.0) | |
| PSU | ±1.0 (0.0 to 40.0) ±2.0 (40.0 to 70.0) | |
| SG | ±0.001 |
| Automatic | ||
| ppt (g/L) | Range: 0.00 to 9.99 ppt (g/L) 10.0 to 70.0 | |
| PSU | Range: 0.00 to 9.99 ppt (g/L) 10.0 to 70.0 | |
| S.G. | Range: 1.000 to 1.041 | |
| Resolution | ||
| ppt (g/L) | 0.01/0.1 | |
| PSU | 0.01/0.1 | |
| SG | 0.001 | |
| Accuracy | ||
| ppt (g/L) | ±0.20 (0.00 to 9.99) ±1.0 (10.0 to 40.0) ±2.0 (40.0 to 70.0) | |
| PSU | ±0.20 (0.00 to 9.99) ±1.0 (10.0 to 40.0) ±2.0 (40.0 to 70.0) | |
| SG | ±0.001 |
| Temperature | 0.0 to 50.0 °C/32.0 to 122.0°F | |
| Resolution | 0.1°C | |
| Accuracy | ±0.5 °C (±1.0 °F) | |
| Method | ||
| ppt | International Oceanographic Tables, 1966 | |
| PSU | Standard Methods for the Examination of Water and Wastewater, 2520 B, Electrical Conductivity Method | |
| S.G. | Standard Methods for the Examination of Water and Wastewater, 2520 C, Density Method | |
| Calibration Solution | HI-70023 (5.00ppt); HI-70024 (35.00 ppt) | |
| Calibration | Automatic, one or two-point calibration at 5.00 ppt or 35.00 ppt | |
| Temperature Compensation | Automatic from 5.0 to 50.0 °C | |
| Environment | 0 to 50°C; RH max 100% | |
| Battery Type | CR2032 3V Lithium-ion (1) | |
| Battery Life | Approximately 100 hours of continuous use | |
| Weight | 68g without battery | |
| Ordering Information | The HI-98319 is supplied with 5.00 ppt salinity calibration standard, 20mL (2 pcs), 35.00 ppt salinity calibration standard, 20mL (2pcs), 3V Lithium battery – CR2032, storage/protection sleeve, instrument quality certificate, and instruction manual. |
Similar Products
