





HI-706 Phosphorus High Range Handheld Colorimeter - Checker HC
In Stock 15 Items available
HI-706
Ideal for fresh water aquariums, the HI-706 High Range Phosphorus Checker bridges the gap between simple chemical test kits and professional instrumentation.
Ideal for fresh water aquariums
The HI-706 High Range Phosphorus Checker bridges the gap between simple chemical test kits and professional instrumentation. Both accurate and affordable, it is designed for fresh water applications and is extremely simple to use.
Ideal for:
- Quick and accurate on the spot analysis
- Fresh water aquaculture
Main Benefits
- Testing is quick and easy
- High precision results - more accurate than chemical test kits
- Auto shut-off feature means the Checker cannot be left on by mistake
- Fully portable, fitting easily into both palm and pocket
Supplied with:
- 2 sample cuvettes
- Cuvette cap
- Starter pack of reagents x 20 tests (re-ordering information: HI-706-25 x 40 tests)
- 1 x 1.5 AAA battery
- Instructions
Also available: HI-706-11 Calibration set
Four steps. One click. Instant Readout.
1. ‘Zero’ the Checker®HC with your vial & 10ml water sample inside
2. Take the vial out and add your reagent
3. Place your vial into your Checker®HC
4. Press the button and read the results
Use HI-706-11 Calibration Check Set with the HI-706 Phosphorus High Range Handheld Colorimeter - Checker®HC.
Use Reagents HI-706-25 with the HI-706 Phosphorus High Range Handheld Colorimeter - Checker®HC, x 40 tests.
Safety Data Sheets
When using any form of chemical, such as Hanna reagents, it is important you download the relevant safety data sheet and make yourself aware of any precautions you should take when handling the chemical. You can access our library of safety data sheets and download a copy by following the link below.
Please note that the '-' in HI- products should be removed from all searches to find the correct information.
Read More
Range | 0.00 to 15.0 ppm | |
Resolution | 0.1 | |
Accuracy @ 25°C | ±0.3 ppm ±5% of reading | |
Light source | LED @ 525 nm | |
Light Detector | Silicon photocell | |
Method | Adaptation of the Standard Methods for the Examination of Water and Wastewater, 18th edition, Heteropolymolybdenum Blue method | |
Environment | 0 to 50°C; RH max 95% non-condensing | |
Battery Type | (1) 1.5V AAA | |
Auto-off | After ten minutes of non-use | |
Dimensions | 81.5mm x 61mm x 37.5mm | |
Weight | 64g | |
Ordering Information | HI-706 Checker® is supplied with (2) sample cuvettes with caps, phosphorus HR reagent starter kit for 20 tests (re-ordering information HI-706-25 x 40 tests) battery, instructions. |