+44 (0)1525 850 855
Order before 4pm for same day dispatch Weekdays only
Hanna Instruments UK HI-9350011 Foodcare K-Type Thermocouple Thermometer with ultra-fast probe
Foodcare Hanna Instruments UK
Hanna Instruments UK HI-9350011 Foodcare K-Type Thermocouple Thermometer with ultra-fast probe
Foodcare Hanna Instruments UK

In Stock 19 Items available


The HI-9350011 is a waterproof portable K-Type thermocouple thermometer made for the food professional that is required to monitor temperature, as part of a hazardous analysis of critical control points (HACCP) plan, in food service, production, packaging, transportation, restaurants or catering.


£124.50 (exc.VAT)
£149.40 (tax incl.)
Full Description Specification
  • FC766C1 ultra-fast K-type thermocouple probe
  • CAL Check™ feature
  • Remaining battery life indication/low battery detection
  • Auto-off
  • IP65 Waterproof casing
  • Our optional HI-710027 blue shockproof rubber boot offers maximum impact protection.
  • Interchangeable with FC766 series thermocouple probes

The HI-9350011, as a meter, can measure over a wide range of temperatures from -50.0°C (-58.0°F) up to 300°C (573°F) and offers a very high accuracy of ±0.4°C (±0.7°F).

The accuracy of the meter is assured with advanced diagnostic features including CAL-Check that checks for abnormal drift of the internal electronics, battery error prevention system (BEPS) that will not allow a reading to be taken when there is not sufficient battery power and probe diagnostics that alert the user when the probe is not connected or has been damaged.

HI-9350011 Foodcare thermometer is supplied with the replaceable FC766C1 Ultra-Fast K-Type thermocouple probe that will reach 90% of the final reading within 4 seconds.

The tip of the FC766C1 is just 1.6 mm (0.06”) in diameter allowing for easy penetrations into solids and semi-solids. The AISI 316 stainless steel body is 95 mm (3.7”) long and is safe for food contact in compliance with Regulation (EC) 1935/2004.

*The measurement range may be limited by probe type, and applies to the probe shaft.

Read More

Range*-50.0 to 199.9°C / 200 to 300°C; -58.0 to 399.9°F / 400 to 572°F
Resolution0.1°C (-50.0 to 199.9°C ) / 1°C (200 to 300°C); 0.1°F (-58.0 to 399.9°F) / 1°F (400 to 572°F)
Meter Accuracy @ 23.0°C±5°C; ±0.4°C (-50.0 to 300°C); ±0.7°F (-58.0 to 572°F)
Probe Accuracy (FC766C1)±1.6°C (-50.0 to 300°C); ±2.9°F (-58.0 to 572°F)
Response time for 90% of final value4 seconds
ProbeFC766C1 penetration, K-type thermocouple probe with 1 m (3.3’) white cable and white handle
Battery Type / Life1.5V AAA (3) / approximately 3500 hours of continuous use; user-selectable auto-off after 8 or 60 minutes of non-use (can be disabled).
EnvironmentRated operating condition: -20 to 50 °C (-4 to 122 °F); limiting condition: -30 to 50°C (-22 to 122°F); storage and transportation condition: -40 to 70 °C (-40 to 158°F); relative humidity 100 %
Storage/transport temperature-40 to 70°C (-40 to 158°F)
Dimensions140 x 57 x 28 mm (5.5 x 2.2 x 1.1’’)
Weight178 g (6.27 oz.)
Ordering InformationHI-9350011 is supplied with FC766C1 temperature probe, 1.5V AAA batteries (3), quick reference guide, and instructions.