HI-735-25 Reagents for HI-735 Total Hardness Low Range Checker HC
In Stock 2 Items available
HI-735-25
The HI-735-25 are high-quality reagents that are pre-measured, allowing for users to achieve fast and accurate measurements with their Total Hardness LR Checker® HC.
Uses the USEPA 130.1 adaptation to determine Low Range Total Hardness. These high-quality reagents are clearly marked with the lot number and expiry date on each packet for traceability. The results will be display in ppm as CaCO3
Tips for an accurate measurement
It is important that the sample does not contain any debris. Whenever the cuvette is placed into the measurement cell, it must be dry outside and completely free of fingerprints, oil or dirt. Wipe it thoroughly with HI-731318 or a lint free cloth prior to insertion.
Shaking the cuvette can generate bubbles, causing higher readings. To obtain accurate measurements, remove such bubbles by swirling or by gently tapping the cuvette.
Do not let the reacted sample stand for too long after the reagent is added or accuracy will be lost.
After the readings, it is important to discard the sample immediately, otherwise the glass might become permanently stained.
Four steps. One click. Instant Readout
1. ‘Zero’ the Checker®HC with your vial inside
2. Place a 10ml water sample into the vial and add your reagent
3. Place your vial into your Checker®HC
4. Press the button and read the results
Use HI-735-11 Calibration Check Set with the HI-735.
Read More
| Accessories | ||
| HI-731318 | cuvette cleaning cloth x 4 | |
| HI-731315 | Glass cuvettes and caps x 2 | |
| HI-731321 | Glass cuvette x 4 | |
| HI-731225 | Cuvette cap for Checker®HC x 4 | |
| HI-93703-50 | Cuvette cleaning solution | |
| HI-740226 | 5mL graduated Syringe | |
| HI-740157P | Plastic refilling pipette x 20 | |
| HI-740144P | Pipette tip x 10 | |
| HI-740143 | 1mL graduated syringe x 6 | |
| HI-740036P | 100mL plastic beaker x 10 | |
| HI-70436M | deionised water (230mL) | |
| HI-70436 | deionised water (1G) |
Similar Products
