+44 (0)1525 850 855
Order before 4pm for same day dispatch Weekdays only
Menu
HANNA HI-700-25 Reagents for HI-700 Pocket Checker

In Stock 42 Items available

HI-700-25

The HI-700-25 are the replacement reagents for the HI-700 Ammonia Low Range Checker® HC.

25 tests

£23.70 (exc.VAT)
£28.44 (tax incl.)
Accessories
Reference
Price
Quantity
Full Description Data Sheets

These high-quality reagents are clearly marked with the lot number and expiry date on each bottle for traceability.

This 25 pack of reagents is for use with the HI-700 Ammonia Low Range Pocket Checker.

The HI-700-25 are high-quality reagents that are pre-measured, allowing for users to achieve fast and accurate measurements with their Ammonia Checker® HC. These reagents follow the Nessler Method in which the reaction between ammonia and reagents causes a yellow tint in the sample.

Please download the Safety Datasheet(s) which provide more detail on the reagents before use; click on the link in the “safety data sheets” paragraph below.

By simply adding 4 drops from each bottle of HI-700-25 reagent set to the sample, the reaction will take place and the HI-700 will determine the concentration from the colour that is produced. The results will be displayed in ppm (mg/L) of ammonia-nitrogen (NH3-N). These reagents are designed to be used with samples that have an expected range of 0.00 to 3.00 ppm ammonia-nitrogen. To convert the reading to ppm of ammonia (NH3) multiply the result by 1.214.

Tip for an accurate measurement

It is important that the sample does not contain any debris.

Whenever the cuvette is placed into the measurement cell, it must be dry outside and completely free of fingerprints, oil or dirt. Wipe it thoroughly with HI-731318 or a lint-free cloth prior to insertion.

Shaking the cuvette can generate bubbles, causing higher readings. To obtain accurate measurements, remove such bubbles by swirling or by gently tapping the cuvette.

Do not let the reacted sample stand for too long after reagent is added, or accuracy will be lost.

After the reading, it is important to discard the sample immediately, otherwise the glass might become permanently stained.

Four steps. One click. Instant Readout.

1. ‘Zero’ the Checker®HC with your vial inside

2. Place a 10ml water sample into the vial and add your reagent

3. Place your vial into your Checker®HC

4. Press the button and read the results

Also available: HI-700-11 calibration set.

Safety Data Sheets

Access safety data sheets online here. When using any form of chemical, it is important you download the relevant safety datasheet and make yourself aware of any precautions you should take when handling the chemical. You can access our library of safety datasheets and download a copy by following the link below.

Please note that the '-' in HI- products should be removed from all searches to find the correct information.

click here

Read More