Hanna Instruments

Scientific Equipment

Safety Data Sheets

SDS search & quick download

Free Delivery

Most of mainland GB for orders over £50. Other charges may apply - see more

Hanna Care

We take the long view, looking after existing customers as much as delighting new ones!

Certificates of Analysis

Download a copy of the certificate of analysis for your solution

BL-983315-0 TDS Mini Controller (Range 0.0 to 199.9 ppm)

BL-983315-0 TDS Mini Controller (Range 0.0 to 199.9 ppm)

Hanna BL-983315-0 TDS Mini Controller (Range 0.0 to 199.9 ppm)

BL-983315-0 TDS Mini Controller (Range 0.0 to 199.9 ppm)

Complete with mounting brackets
2 year manufacturer warranty
£179.20 (exc. VAT) £215.04 (inc. VAT)

The controllers have been designed for TDS control in hydroponics, horticulture and water conditioning. The BL-983315 is a compact, panel mounted, process controller for measuring total dissolved solids (TDS) of a process stream that is within the 0.0 to 199.9 ppm (mg/L) range. The device features a large LCD with protective cover.

BL-983315-0 TDS Mini Controller (Range 0.0 to 199.9 ppm) information

Hanna's extended description

Users may choose from automatic or manual dosing modes. When in automatic mode the dry contact relay is activated when a reading is above the set point. The relay can be used to supply power to a dosing pump or a solenoid connected to a valve. The BL-983315 can also be used to monitor the quality of water produced from ion exchange, reverse osmosis (RO) or distillation.

The BL-983315 uses a 0.5 conversion factor in which 1.0 μS/cm = 0.5 ppm.

Adjustable Dry Contact Dosing Relay

The BL-983315 features a dosing relay that is activated when the reading is above a user programmable set point.

Programmable Overdose Protection

For enhanced safety the mini controller can be programmed to deactivate the dosing relay if the set point is not reached within a specified time interval. The overdosing timer is programmable from 5 to 30 minutes or disabled.

Relay Control Override

With the flick of a switch the mini controller's relay can be disabled (Off), placed in control (Auto), or be activated for manual operation (On) which is useful for priming a dosing pump.

Multicolour LED Indicator

Multicolour LED indicator allows an operator to quickly check the status of the controller.

  • Green = Meter in measurement mode and reading is below the set point
  • Orange/Yellow = Reading is above the set point and the relay is activated
  • Blinking Red = Indicates an alarm condition such as when the maximum dosing time has been exceeded

  • Fuse Protected Dosing Contacts

    The relay dosing contact is rated for up to a 2A load and is fuse protected.

    Labelled Termination Connections

    Quick-connect terminal blocks are clearly labeled for easy connection to power, conductivity probe and relay that can be used to operate a dosing pump, valve, audible alarm, or light.

    1/2" (13mm) NPT Male Threaded Amperometric Probe for Mounting In-line*

    The BL-983315 mini controller uses the HI-7634-00 conductivity probe that is available with different cable lengths.

    *HI-7634-00 is not included and must be ordered separately.

    Order Information:

    The BL 983315 is supplied with mounting brackets, transparent cover, and instructions.

    Mains powered - All mains operated equipment is compatible with UK AC voltage and frequency – 230V, 50Hz.

    Replaceable Electrode – No need to replace the whole controller when the electrode needs replacing. Spare and replacement electrodes are available for this product.


    Specifications list


    Range 0.0 to 199.9 µS/cm
    Resolution 0.1 µS/cm
    Accuracy ±2% F.S.
    TDS Conversion Factor 0.5
    Probe HI-7634-00 (not included)
    Temperature Compensation Automatic, 5 to 50°C (41 to 122°F) with ß = 2%/°C
    Calibration manual, with CAL trimmer
    Dosing Relay max 2A (fuse protected), 250 Vac
    Dosing Selection Relay activated (contact closed) when the measurement reading is greater than the setpoint
    Setpoint adjustable from 0 to 199.9 µS/cm
    Overtime adjustable, typically from 5 to approx. 30 minutes
    Power Supply 12 VDC adapter (included)
    Dimensions 83 x 53 x 99 mm (3.3 x 2.1 x 3.9")
    Weight 200 g (7.1 oz.)

    Questions & Answers

    Got a question to ask? Use this form to submit your question.
    Question will be displayed after moderation.
    Name* Product Question*
    No questions yet?
    Don 't be shy, be the first to ask.