HI-93702-03 Reagents for 300 copper tests
In Stock 1 Item available
HI-93702-03
The HI-93702-03 are reagents for the colorimetric determination of copper. There are enough reagents for 300 tests and are for use with Hanna’s compatible benchtop and portable photometers.
Reagents for 300 copper tests for HI-93702.
The HI-93702-03 are high quality reagents that are pre-measured, allowing for users to achieve fast and accurate colorimetric measurements. These reagents follow the bicinchoninate method in which the reaction between copper and the reagent causes a colour change in the sample. The intensity of colour is determined by a compatible photometer and the copper concentration will be displayed in mg/L (ppm). These reagents are designed to be used with samples that have an expected range of 0.00 to 5.00 mg/L copper.
Tip for an accurate measurement
It is important that the sample does not contain any debris.
When the cuvette is placed into the measurement cell, it must be dry outside and completely free of fingerprints, oil or dirt. Wipe it thoroughly with HI-731318 or a lint-free cloth prior to insertion.
Shaking the cuvette can generate bubbles, causing higher readings. To obtain accurate measurements, remove such bubbles by swirling or by gently tapping the cuvette.
Do not let the reacted sample stand for too long after reagent is added, or accuracy will be lost.
After the reading, it is important to discard the sample immediately, otherwise the glass might become permanently stained.
Read More
| Package | packets | |
| Quantity | 300 tests | |
| Method | bicinchoninate method |
Similar Products
