Hanna Instruments

Scientific Equipment

Safety Data Sheets

SDS search & quick download

Free Delivery

Most of mainland GB for orders over £50. Other charges may apply - see more

Hanna Care

We take the long view, looking after existing customers as much as delighting new ones!

Certificates of Analysis

Download a copy of the certificate of analysis for your solution

HI-1285-6 Probe for HI-9813-6

HI-1285-6 Probe for HI-9813-6

HI-1285-6 Probe for HI-9813-6

HI-1285-6 Probe for HI-9813-6

pH and EC Probe
In Stock
£125.80 (exc. VAT) £150.96 (inc. VAT)

Measure pH, conductivity (EC), and TDS (ppm) with the HI-1285-6 multiparameter probe.

Perfect for measurements in greenhouses, water treatment, and boilers and cooling towers with a polypropylene body, built in temperature sensor, and pre-amplified pH electrode. The HI-1285-6 is designed for use with HI-9813-6 Portable pH/EC/TDS/Temperature Meter with CAL Check™.

  • 3 in 1 probe with pH, conductivity (EC), TDS (ppm), & temperature sensors
  • Pre-amplified for more accurate readings
  • Great for hydroponics, aquariums, pools, & ponds
  • HI-1285-6 Probe for HI-9813-6 information

    Hanna's extended description

    Pre-amplified pH and EC Probe with CAL CHECK™

    The HI-1285-6 is a pre-amplified pH and EC probe with CAL CHECK™ for use with the HI-9813-6.

    Ideal for
  • Greenhouses
  • Hydroponics
  • Environmental monitoring
  • Water treatment
  • Boilers and cooling towers
  • Hanna Instruments offers a wide variety of electrodes that are designed for many different applications. The sensing material, body material, and connection type used are just some of the design considerations.

    Pre-Amplified Multiparameter pH Probe

    The pH electrode circuit has a built-in amplifier that serves to reduce the effects of electrical noise on the high impedance pH measurement. Electrical noise can come from motors and pumps that are common in greenhouses. The single reference junction design of the pH electrode has a cloth junction that allows ion movement between the inner gel electrolyte and the sample being measured. The advantage of the cloth junction is that it can be extracted from the probe, exposing a fresh surface when readings become drifty or erratic. These features make this probe ideal for use in fertiliser solutions.

    Amperometric EC/TDS Sensor

    EC/TDS readings are performed by a two-pin amperometric sensor. An alternating voltage is applied to the sensor and the amount of current that passes between the two stainless steel pins determines the amount of dissolved ionic solids present.

    Built-In Temperature Sensor

    pH and EC/TDS readings must be temperature compensated in order to obtain accurate results. The built-in temperature sensor of the HI-1285-6 provides a speedy temperature reading which is then used to adjust the pH and EC/TDS results accordingly.

    Polypropylene Body

    The polypropylene body of the HI-1285-6 multiparameter pH probe houses all three sensors within a sturdy, single body design. This body material is suitable for a wide range of applications and excels in measurements with portable meters due to its durability. The fins around the spherical glass pH bulb minimises breakage due to accidental bumping or dropping of the electrode. The polypropylene plastic is a high-quality plastic that is chemically resistant to many aggressive chemicals.

    DIN Connector with CAL Check

    The HI-1285-6 uses a DIN connector. This type of connector is generally proprietary to the meters they are supplied with and may not be interchangeable. The connection of the HI-1285-6 enables the CAL Check function on the HI-9813-6 portable multiparameter meter.

    Din Connection

    Cal CheckTM - provides peace of mind every time your thermometer is switched on by automatically checking the thermometer circuit is accurate at 0°C and showing the result on screen at start up. Ensures your thermometer is working correctly and is in calibration.


    Specifications list


    Reference Single, Ag/AgCl
    Junction Cloth
    Connector Multi-pin with temperature sensor & Cal-Check
    Electrolyte Gel
    Max Pressure 0.1 bar
    Range 0 to 13 pH; EC; 0 to 60°C (32 to 140°F)
    Tip Shape Spheric (dia: 8 mm)
    Temperature Sensor Yes
    Amplifier Yes
    Body Material Polypropylene
    Cable 7-pole; 2 m (6.6')
    Recommended Use Greenhouses, hydroponics, environmental monitoring, water treatment, boilers, cooling towers

    Questions & Answers

    Got a question to ask? Use this form to submit your question.
    Question will be displayed after moderation.
    Name* Product Question*
    No questions yet?
    Don 't be shy, be the first to ask.