Hanna Instruments

Scientific Equipment

HI-1332P pH Electrode ideal for Chemical Testing, BNC Connector + Pin

HI-1332P pH Electrode ideal for Chemical Testing, BNC Connector + Pin

HI-1332P pH Electrode ideal for Chemical Testing, BNC Connector + Pin

HI-1332P pH Electrode ideal for Chemical Testing, BNC Connector + Pin

Ideal for use in aquariums
In Stock
£128.35 (exc. VAT) £154.02 (inc. VAT)

The HI-1332P is a gel filled, plastic body pH electrode with double reference junction that can be used with most hand-held pH/mV meters. Ideal for use with meters that have CAL Check.

HI-1332P pH Electrode ideal for Chemical Testing, BNC Connector + Pin information

Hanna's extended description

The HI-1332P is a gel filled, plastic body pH electrode with double reference junction that can be used with most hand-held pH/mV meters.


Ideal for


  • Chemicals
  • Field applications
  • Quality control testing

  • Supplied fitted with


  • BNC + Pin connector
  • 1m cable

  • Tips for the most accurate measurements

    Keep electrode hydrated

    Ideally, pH electrodes should be kept in a storage solution when not in use. Placing the electrode in a small glass filled with storage solution is suitable. An option for pocket meters is to place a small piece of sponge into the meter’s cap and pour storage solution (HI-70300) into the cap to wet the sponge. Alternatively, purchase HI-740200 specialised electrode caps for storage. Pouring off any excess solution beforehand, the cap can then be placed on the meter.


    Clean electrodes before use

    Clean the junction of your electrodes once a day or at least once a week to prevent junction clogging and to maintain accuracy. Immerse the electrode in the proper cleaning solution for at least 15 to 20 minutes. Hanna offers a wide range of cleaning solutions for general purpose and specific applications.


    Replace electrode once a year

    If your electrode takes too long to stabilise a reading, or readings fluctuate wildly, it is most likely time to replace the electrode. The typical life span of any pH electrode is from 6 months to 1.5 years.



    BNC Connection – BNC is one of the most commonly used connector types in pH meters and electrodes. Compatible with any meter or electrode that uses BNC connectors.

    Specifications

    Specifications list

    Specifications

    Reference Double, Ag/AgCl
    Junction Ceramic, single / 15-20μL/h
    Connector HI-1332B – BNC; HI-1332D DIN; HI-1332P BNC + Pin* (*For pH meters with CAL check™ system)
    Electrolyte KCl 3.5M
    Max Pressure 0.1 bar
    Range 0 to 13 pH; @ 0 to 70°C
    Tip Shape spheric (dia: 7.5mm)
    Temperature Sensor No
    Amplifier No
    Body Material PEI
    Cable coaxial; 1 m (3.3')
    Recommended Use Chemicals, field applications, quality control

    Product Literature

    literature - PDF

    Hanna Instruments Literature

    Questions & Answers

    Got a question to ask? Use this form to submit your question.
    Question will be displayed after moderation.
    Name* Product Question*
    No questions yet?
    Don 't be shy, be the first to ask.