HI-5003 pH 3.00 Technical Buffer Solution (±0.01 pH), 500ml information
Hanna's extended description
Technical Buffer Solutions are available in 500ml, 1 litre, 1 Gallon*, and handy 20ml sachets in packs of 10 or 25 for on-site or field use. The sachet single dose is safe, easy to carry and remains fresh.
Technical buffer solutions come with a certificate of analysis on purchase.
*One Gallon, colour-coded bottles are available in pH 4.01, pH7.01 and 10.01.
HI-5003 pH3.00 Technical Buffer Solution, 500ml
HI-5003 is a premium quality pH 3.00 Technical buffer solution, National Institute of Standards and Technology (NIST) traceable and supplied with a Certificate of Analysis. The buffer is ideal for users expecting an acidic reading.
Buffer solutions should be stored at 25 C, away from direct sunlight for accurate readings.
To correctly maintain your meter/electrode, we highly recommend use of a Hanna cleaning solution, as well as a buffer, for maximum performance every time.
Hanna buffer solutions are prepared, ready-to-use, according to precise formulas and standardised in accordance with the National Institute of Standards and Technology (NIST) to ensure quality and accuracy. All solutions show a batch number, an expiry date, and the correlation table between pH and temperature. All bottled solutions are sealed with an air tight, tamper-proof seal to prevent any Carbon Dioxide from entering and causing a change in the pH buffer value.
Browse the Hanna complete range of solutions
- pH buffer solutions
- Standard solutions for conductivity, Total Dissolved Solids (TDS), turbidity, salinity and Ion-Selective Electrode (ISE) calibration
- Oxidation Reduction Potential (ORP) test and pre-treatment solutions
- Reference fill solutions for refillable electrodes
- General and specific cleaning solutions for electrodes
- Solutions for electrode maintenance and storage
- Solutions for sample preparation
Solutions are available in many sizes ranging from 20ml sachets for small users to 3.78L (1 gallon) containers for large quantity usage in laboratories.
For safety and traceability, all Hanna solutions are provided with a label showing the batch number and expiry date. A certificate of analysis is available on request in line with NIST standards.
Remember:
- Calibration only counts when using fresh solutions and properly cleaned electrodes every time.
- Routine maintenance will ensure accurate readings while extending the life of the electrode.
Specifications
Specifications list
Specifications
pH value at 25°C | 3.00 | |
Code | HI-5003 | |
Package | 500mL | |
Certificate of Analysis | Yes |
Downloadable Manuals
MSDS
EN_HI5003_CLP_1.pdfProduct Literature
literature - PDF

Questions & Answers
Question will be displayed after moderation.