HI-7001M pH 1.68 Buffer Solution, 230 mL bottle

In Stock

£20.60 (exc. VAT) £24.72 (inc. VAT)

Qty:

Achieve accurate pH readings and check your meter and electrode is functioning correctly with Hanna buffer solutions. Available in convenient, ready-made pH values 1.68, 4.01, 6.86, 7.01, 9.28 and 10.01 (and more), Hanna has a certified value calibration solution with an accuracy of +/- 0.01pH @ 25◦C for all requirements.

*For even greater accuracy, scroll down to read Hanna’s Technical and Millesimal Buffer range explained.

HI-7001M pH 1.68 Buffer Solution, 230 mL bottle information

Hanna's extended description

The HI-7001M is a 230 mL bottle of 1.68 pH buffer solution

Plating bath samples, food samples and waste samples are often acidic in nature. To increase accuracy of your measurement at lower pH, it is important to calibrate your electrode and meter at that pH also.

The HI-7001M pH 1.68 buffer is available to fulfil this requirement. This pH 1.68 buffer solution allows you to calibrate your measurement system in the acid pH range and bracket your acidic samples by using a second value at 4.01 pH or near 7.01 pH.

About buffers

Buffer solutions should be stored at 25°C, away from direct sunlight for accurate readings.

To correctly maintain your meter/electrode, we highly recommend use of a Hanna cleaning solution, as well as a buffer, for maximum performance every time. pH7 can also be used as an emergency storage solution.

Hanna buffer solutions are prepared, ready-to-use, according to precise formulas and standardised in accordance with the National Institute of Standards and Technology (NIST) to ensure quality and accuracy. All solutions show a batch number, an expiry date, and the correlation table between pH and temperature. A certificate of analysis is available on request. All bottled solutions are sealed with an air tight, tamper-proof seal to prevent any Carbon Dioxide from entering and causing a change in the pH buffer value.

*Millesimal and Technical Buffer solutions explained

Designed and manufactured for those where accuracy really is vital, Millesimal buffer solutions are produced to a premium quality for customers who require a greater resolution of 0.001 for pH measurements. Accuracy can be guaranteed at +/- 0.002 @ 25°C.

To achieve the more accurate results, Millesimal Buffer solutions are available in pH1.000, pH1.679, pH2.000, pH3.000, pH4.010, pH6.000, pH6.862, pH7.010, pH7.413, pH8.000, pH9.000, pH9.177, pH10.010, pH11.000, pH12.000, pH12.450, pH13.000.

For those requiring a greater spectrum, as well as increased accuracy to readings, Hanna also manufacture a Technical Buffer solution range that shares the accuracy of standard buffers, +/- 0.01 @ 25°C, and features the following pH levels, pH1.00, 2.00, 3.00, 4.01, 5.00, 6.00, 6.86, 7.01, 7.41, 8.00, 9.00, 10.01, 11.00, 12.00, 12.45, 13.00.

Both technical and Millesimal buffer solutions come with a certificate of analysis on purchase.

Hanna Instruments

Scientific Equipment

Safety Data Sheets

Free Delivery

Hanna Care

Certificates of Analysis