HI-98319 Waterproof Salinity Tester

Ask a question

Simple waterproof dip-in digital tester

Measures conductivity to determine salinity

In Stock

£71.50 (exc. VAT) £85.80 (inc. VAT)

Qty:

Our new HI-98319 waterproof salinity and temperature tester is perfect for any saltwater aquarium. A more accurate alternative to refractometers, this tester uses conductivity to determine salinity levels of natural and artificial seawater. Ideal for testing salinity in salt water aquariums, it is quick and easy to use and provides digital readout of both salinity and temperature.

Salinity results are displayed in either parts per thousand (ppt), Practical Salinity Units (PSU), or Specific Gravity (SG).

Our marine salinity tester is supplied complete with batteries and solutions allowing you to start measuring right away. Also displays temperature.

HI-98319 Waterproof Salinity Tester information

Hanna's extended description

HI-98319 Waterproof Salinity Tester

This pocket sized meter is waterproof and perfect for the measurement of salinity aquariums using conductivity to determine the salinity level of your water.

Salinity should be checked regularly in aquariums. As Oceans are very stable environments, where there is not a lot of day to day change in the water parameters, fish can respond negatively to even small changes in salinity.

Each meter is supplied with:

CR2032 battery (installed)

Storage/protection shield

Instruction manual

Quality certificate

35.00 ppt calibration standard sachet (x 4)

Care and Maintenance

To obtain the highest accuracy for measurements, it is important to follow these guidelines:

Calibration is only as good as the solution being used. Fresh solution should be used for each calibration

The probe should be rinsed with purified water each time before placing in calibration solution or sample to be tested

Recommended solution: HI-70024P Calibration Solution 35.00ppt, 25 x 20ml sachets

Battery Replacement

The meter features a low battery indicator. When the battery is running low, the battery indicator will blink on the LCD. Simply change the CR2032 Li-ion battery by removing the battery cover located on the back of the meter.

Specifications

Specifications list

Specifications

Range:
ppt		0.0 to 70.0 ppt (g/L)
PSU		0.0 to 70.0 PSU
S.G.		0.001-1.041
Temperature		0.0 to 50.0 °C/32.0 to 122.0°F
Resolution
ppt		0.1 ppt (g/L)
PSU		0.1 PSU
S.G.		0.001
Temperature		0.1 °C/1 °F
Accuracy
ppt		±1.0 ppt for 0.0 to 40.0 ppt; ±2.0 ppt for 40.0 to 70.0 ppt
PSU		±1.0 PSU for 0.0 to 40.0 PSU; ±2.0 PSU for 40.0 to 70.0 PSU
S.G.		±0.001
Temperature		±0.5 °C (±1.0 °F)
Method
ppt		International Oceanographic Tables, 1966
PSU		Standard Methods for the Examination of Water and Wastewater, 2520 B, Electrical Conductivity Method
S.G.		Standard Methods for the Examination of Water and Wastewater, 2520 C, Density Method
Calibration Solution		HI-70024 (35.00 ppt)
Calibration		Automatic, single point 35.00 ppt
Temperature Compensation		Automatic from 5 to 50.0 °C
Environment		0 to 50°C; RH max 100%
Battery Type		CR2032 3V Li-ion (1)
Battery Life		Approximately 100 hours of continuous use
Weight		68g without battery

Enter your email for 10% off your first order - Use Code "HAN10"

Hanna Instruments

Scientific Equipment

HI-98319 Waterproof Salinity Tester

HI-98319 Waterproof Salinity Tester

HI-98319 Waterproof Salinity Tester