HI-7061-012 GroLine Cleaning Solution for pH electrodes, 120ml
In Stock 3 Items available
HI-7061-012
HI-7061-012 is a 120mL bottle of GroLine general purpose cleaning solution that can be used for a variety of applications.
Hanna's cleaning solutions eliminate impurities and residues that are left on electrode surfaces when immersed in samples during measurement or when stored incorrectly. Hanna suggests cleaning the bulb and junction of your electrode on a regular basis to ensure that the probe is always clean and to prevent any clogging of the junction.
Electrodes can become dirty from use and will produce inaccurate results even if they read correctly in a pH buffer.
The most common cause for pH measurement inaccuracies is an unclean or improperly cleaned electrode. This is very important to note, because during calibration, the instrument assumes that the electrode is clean and that the standardisation curve created during the calibration process will remain a valid reference until the next calibration. pH meters on the market today will allow an offset voltage of approximately ±60 mV. The deviation from 0 mV is not unusual but ideally should be no greater than ±30 mV. The calibration process compensates for the change in offset voltage. If the mV offset continues to deviate and the meter is calibrated with a dirty electrode then inaccurate readings will result.
Cleaning is a fast and effective routine that should be performed on a regular basis as a preventative measure against using a dirty electrode and to ensure that the junction is not clogged. By simply immersing the electrode in the HI-7061-012 cleaning solution for 15 to 20 minutes will dissolve any mineral deposits or other coatings.
Hanna recommends using HI-50036p Groline Quick Cal Solution for pH/EC meters alongside this product.
Read More
| Description | general purpose cleaning solution | |
| Package | bottles | |
| Size | 120mL | |
| Quantity | 1 | |
| Certificate of Analysis | No |
Similar Products
