HI-983308 TDS Meter, 9.99 ppt (g/L) information
Hanna's extended description
The HI-983308-02 water resistant TDS meter is Hanna's reply to requests for accurate, affordable process monitoring with low maintenance.
This meter is supplied with a direct 2-pin probe and 2m cable with ½ inch thread for flow-thru mounting. The probe has a temperature sensor to automatically compensate against temperature changes from 5 to 50°C.
In the measurement mode, a red LED will warn the user in the event the reading is outside of the alarm interval. A front trimmer allows manual calibration at 1 point. The electrical circuitry is tightly sealed inside the water resistant enclosure. TDS can be installed anywhere quickly and easily with the casings moulded eye. The casing has been specially designed to sit out of the way and will not roll of a table. The 12 Vdc power supply allows continuous monitoring over extended periods of time.
Ideal forKey features
Supplied with
Specifications
Specifications list
Specifications
Range | 0.00 to 9.99 ppt (g/L) | |
Resolution | 0.01 ppt | |
Accuracy | ±2% F.S. | |
Calibration | manual, 1 point through trimmer | |
Calibration Solution | HI 70038P | |
Temperature Compensation | automatic, 5 to 50°C (41 to 122°F) with ß=2%/°C | |
Setpoint | 0.70 to 3.50 ppt | |
Alarm | red LED (blinks when measurement differs from setpoint by: ±0.2 ppt |
|
Probe | HI 7632/2 with 2 m (6.6') cable and ½" thread (included) |
|
Power Supply | 12 Vdc power adapter (included) | |
Environment | 0 to 50°C (32 to 122°F); RH max 100% | |
Dimensions | 86 x 110 x 43 mm (3.4 x 4.3 x 1.7") | |
Weight | 215 g (7.6 oz.) |
Downloadable Manuals
Questions & Answers
Question will be displayed after moderation.
