HI-8936DLN Conductivity Transmitter

Ask a question

Use with HI-7635 or HI-7638

2 year manufacturer warranty

£490.50 (exc. VAT) £588.60 (inc. VAT)

Qty:

HI-8936 is a conductivity transmitter that utilises a four-ring potentiometric probe. This probe is virtually immune to contamination by unclean solutions. This allows the transmitter to operate at peak performance at all times.

Automatic temperature compensation ensures fast, accurately compensated readings even during sudden temperature fluctuations

Optional backlit, LCD display for easy viewing

Mains powered - All mains operated equipment is compatible with UK AC voltage and frequency – 230V, 50Hz.

Water Resistant – Can withstand temporary exposure to water, but should not be submerged or washed under running water.

Frequently Bought Together

This item HI-8936DLN Conductivity Transmitter
HI-7635 In-line Conductivity Probe

Price for all:

£645.90 (exc. VAT)

HI-8936DLN Conductivity Transmitter information

Hanna's extended description

Conductivity Transmitter Using 4-Ring Technology, range: 0.0 to 199.9 µS/cm; with LCD display.

Easy Installation

The HI-8936 transmitter may be wall-mounted at any convenient location close to the measurement site. The HI-8936 series should be used in conjunction with the HI-7635 in-line probe or HI-7638 platinum probe.

Optional LCD

HI-8936”L” versions allow easy verification and monitoring of measured values and is easier to calibrate and maintain.

Automatic Temperature Compensation

Temperature effects are compensated for by utilising both the built-in temperature sensor on the probe and the transmitter’s ATC circuitry with a of 2%/°C.

Direct Probe Connection

Direct connection of the probe to the transmitter assures a positive electrical connection with no signal loss over long distances.

Specifications

Specifications list

Specifications

EC Range		HI-8936AN & ALN: 0.0 to 199.9 mS/cm HI-8936BN & BLN: 0.00 to 19.99 mS/cm HI-8931CN & CLN: 0 to 1999 µS/cm HI-8931DN & DLN: 0.0 to 199.9 µS/cm
EC Resolution		HI-8936AN & ALN: 0.1 mS/cm HI-8931BN & BLN: 0.01 mS/cm HI-8931CN & CLN: 1 µS/cm HI-8931DN & DLN: 0.1 µS/cm
EC Accuracy		±2% F.S. (excluding probe error)
EC Calibration		manual, two point, through offset and slope trimmers
EC/TDS Temperature Compensation		fixed or automatic from 0 to 50°C (32 to 122°F) with β=2%/°C
EC/TDS Probe		HI-7635 for in-line applications (not included)
Recorder Output		4-20 mA, not isolated, max 500 Ohm
LCD Display		AN, BN, CN & DN = No ALN, BLN, CLN, & DLN = Yes
Power Supply		without LCD: 12-30 VDC; with LCD: 17-36 VDC
Environment		0 to 50°C (32 to 122°F); RH max 95% non-condensing
IP Rating		IP65
Dimensions		165 x 110 x 71 mm (6.5 x 4.3 x 2.8’’)
Weight		1KG
Ordering Information		The HI-8936 series is supplied with instructions

Hanna Instruments

Scientific Equipment

Safety Data Sheets

Free Delivery

Hanna Care

Certificates of Analysis