HI-93738-03 Chlorine Dioxide Reagents information
Hanna's extended description
Chlorine Dioxide Reagents - 300 Tests.
The HI-93738-03 are high quality reagents that are pre-measured, allowing for users to achieve fast and accurate colorimetric measurements. These reagents follow the chlorophenol red method in which the reaction between chlorine dioxide and reagent causes a purple tint in the sample. By simply adding the HI-93738-03 reagents to the sample, a reaction will take place and a compatible photometer can be used to determine the concentration from the colour that is produced. The results will be displayed in mg/L (ppm) of chlorine dioxide. These reagents are designed to be used with samples that have an expected range of 0.00 to 2.00 mg/L chlorine dioxide.
Tip for an accurate measurement
It is important that the sample does not contain any debris.
When the cuvette is placed into the measurement cell, it must be dry outside and completely free of fingerprints, oil or dirt. Wipe it thoroughly with HI-731318 or a lint-free cloth prior to insertion.
Shaking the cuvette can generate bubbles, causing higher readings. To obtain accurate measurements, remove such bubbles by swirling or by gently tapping the cuvette.
Do not let the reacted sample stand for too long after reagent is added, or accuracy will be lost.
After the reading, it is important to discard the sample immediately, otherwise the glass might become permanently stained.

Specifications
Specifications list
Specifications
Package | Dropper bottles & packets | |
Quantity | 300 tests | |
Method | adaptation of the Chlorophenol Red Method. The reaction between chlorine dioxide and reagents causes a colourless to purple tint in the sample. |
Downloadable Manuals
MSDS
EN_HI93738A-0_CLP_1.pdfMSDS
EN_HI93738B-0_CLP_1.pdfMSDS
EN_HI93738C-0_CLP_1.pdfMSDS
EN_HI93738D-0_CLP_1.pdfQuestions & Answers
Question will be displayed after moderation.
