HI-3827 Boiler feedwater test kit for 6 parameters information
Hanna's extended description
Boiler and Feedwater Combination Test Kit
The HI-3827 boiler and feedwater chemical test kit measures 6 main parameters; alkalinity, chloride, hardness, pH, phosphate and sulphite.
All the tests are performed with a titration method except for the pH test. pH is obtained with Hanna's pHep®, pH electronic tester which guarantees greater accuracy and a longer life than traditional litmus paper.
This kit is equipped with all the necessary reagents and equipment to perform over 100 tests (50 for phosphate). All tests are easy to perform with step-by-step instructions and the kit is supplied with a rugged portable carrying case for transportation.
Significance of use
Monitoring the alkalinity, chloride, hardness, phosphate, pH, and sulphite concentrations in boiler and feedwater is essential in preventing hazardous or costly situations.
These parameters are important in determining the corrosive characteristics of water due to carbonates and chloride.
Sulphite is critical to prevent pitting and oxidation of metal components. A high level of sulphite results in a lowered pH, which can also promote corrosion.
Specifications
Specifications list
Specifications
Alkalinity (as CaCO3) | ||
Type | Titration | |
Range | 0-100mg/L (ppm) 0-300 mg/L (ppm) |
|
Smallest increment | 1mg/L (ppm) 3mg/L (ppm) |
|
Method | phenolphthalein/bromphenol blue | |
Number of tests | 110 avg. | |
Chloride (as Cl-) | ||
Type | Titration | |
Range | 0-100mg/L (ppm) 0-1000 mg/L (ppm) |
|
Smallest increment | 1mg/L (ppm) 10mg/L (ppm) |
|
Method | Mercuric nitrate | |
Number of tests | 110 avg. | |
Hardness (as CaCO3) | ||
Type | Titration | |
Range | 0.0-30.0mg/L (ppm) 0-300 mg/L (ppm) |
|
Smallest increment | 0.3mg/L (ppm) 3mg/L (ppm) |
|
Method | EDTA | |
Number of tests | 100 avg. | |
Phosphate (as PO3-4) | ||
Type | Colorimetric | |
Range | 0-5mg/L (ppm) | |
Smallest increment | 1mg/L (ppm) | |
Method | Ascorbic acid | |
Number of tests | 50 avg. | |
pH | ||
Type | Electronic pH tester | |
Range | 0.0-14.0 pH | |
Smallest increment | 0.1 pH | |
Method | pH tester | |
Number of tests | Life of the meter | |
Sulphite (as Na2SO3) | ||
Type | Titration | |
Range | 0.0 – 20.0 mg/L (ppm) 0-200 mg/L (ppm) |
|
Smallest increment | 0.2mg/L (ppm) 2 mg/L (ppm) |
|
Method | Iodometric | |
Number of tests | 110 avg. | |
Dimensions | 440 x 330 x 100 mm | |
Ordering Information | HI-3827 test kit includes all of the necessary reagents and accessories to perform over 100 tests for every parameter, with the exception of phosphate, which includes reagents for 50 tests, hard carrying cases and instructions. | |
Replacement Reagents | HI-3811-100 Alkalinity (as CaCO3) HI-3815-100 Chloride, 110 tests HI-3812-100 Hardness, total (as CaCO3) 100 tests HI-3833-050 Phosphate, 50 tests HI-3810-100 Dissolved Oxygen, 110 tests HI-3822-100 Sulphite (as Na2SO3) |
Downloadable Manuals
Manuals
3811.pdfManuals
3812.pdfManuals
3815.pdfManuals
3822.pdfManuals
manHI_3833.pdfManuals
man_98107N_2019.pdfMSDS
EN_BROMOPHENOL BLUE_CLP_1.pdfMSDS
EN_CALMAGITE SOLUTION_CLP_1.pdfMSDS
EN_DIPHENYLCARBAZONE_CLP_1.pdfMSDS
EN_EDTA REAGENT_CLP_1.pdfMSDS
EN_HARDNESS BUFFER_CLP_1.pdfMSDS
EN_HI3811-0_CLP_1.pdfMSDS
EN_HI3812-0_CLP_1.pdfMSDS
EN_HI3815-0_CLP_1.pdfMSDS
EN_HI3822-0_CLP_1.pdfMSDS
EN_HI3833-0_CLP_1.pdfMSDS
EN_NITRIC ACID SOLUTION_CLP_2.pdfMSDS
EN_PHENOLPHTHALEIN INDICATOR_CLP_1.pdfMSDS
EN_STARCH_CLP_1.pdfMSDS
EN_SULFAMIC_CLP_1.pdfMSDS
EN_SULPHURIC_CLP_1.pdfQuestions & Answers
Question will be displayed after moderation.
